Shanxi Xinyuheng Trade Co.,Ltd

 

Skycolor, Grando,Allwin, Gongzheng, Wit-color, Flora, Audley, etc.

 

 

Cotton/Cotton-polyester(more than 70% cotton content)

 

 

1. First, the ink supply system needs to be cleaned with a specific cleaning solution, avoiding the use of alcohol or pure water to clean or wipe the print head, so as to avoid blocking the print head and reduce the print quality.

2. Because the ICC curve has a great influence on the color brightness and the reversibility, it is necessary to select the appropriate ICC curve according to the different substrate when using DTF Ink to ensure the excellent printing effect.

3. For white ink, shake well before use, and it is recommended to increase the mixing equipment to prevent long-term non-use of the possible precipitation.

4. Before mass production must first try hot drawing sample, and after testing qualified before mass production.

5. The DTF Ink to the pattern of higher requirements, the resolution must be more than 300 can be hot stamping, and the pattern should not be too fine, otherwise hot stamping effect will not be realistic

 

 

1. The DTF pigment Ink needs to be stored in a clean, cool and dry place with a temperature of 5-30 ° C and a relative humidity of 40-85% .

2.Pay attention to the moisture of the print head, check the ink stack to avoid dry nozzles by aging the ink stack

3. One day in advance, put the ink into the printing room and keep it at a constant temperature environment before printing on the machine

 

 

0.1/0.2/0.5/1kg per bottle, special packing is available by request.

 

 

1.Avoid Light, Storage Temperature 0-35℃; After the aluminum film is opened, dust cannot enter the ink.
2.The goods are identified as Non-dangerous goods in accordance with IMO, RID/ADR,IMDG,ICAO,IATA.
3.Products are not dangerous goods, MSDS is available.

 

 

http://www.stableinks.com/